Gen 1 Electric Storage Tank Water Heater

The #1 water heater in the USA. While most heaters in Singapore last about 5 years, an AOS heater can last over 10.
Gen 1 storage heater award square grey
water heater lasted 25 years eastwood place aosbath

AOS Heaters, Proven to Last Over 10 Years in Singapore

Chiltern Park Condo: 33 years
Eastwood Place: 25 years
Springbloom Condo: 28 years

We don't like to overpromise. We prefer to over-deliver. That's why we tell you an AOS water heater will last around 10 years.

Gen 1 is the Top Choice for False Ceilings Due to its Long Lifespan

If a HDB installation costs $300, a false ceiling installation can go up to 2 times the amount.. $600!

False ceilings are expensive. Condo and landed home owners invest in a good heater that lasts a long time, so they can avoid ceiling works.

You will save more time and money if you get a good heater.
ceiling water heater above
Times Magazine AOSmith glass lined blue diamond new discovery hot water rusting corroding USA permaglas
Patent US6303183

The Secret to Durability: Blue Diamond Tank Lining, a Patented Glass Fused to the Heater Tank.

When you buy an AOS heater, you are going for their exclusive Blue Diamond™ tank, patented in the 1930s.

Blue Diamond™ is a special glass formula that coats the inside of the heater tank. Blue Diamond™ glass is fused perfectly to the metal tank. It can expand and contract with the tank without breaking off.

Every time the tank goes through a heating cycle, the glass is stress-tested. Blue Diamond™ can withstand hundreds of thousands of such thermal expansions without breaking.
high resistance robotic weld 21kg 850C blue diamond

Blue Diamond is Tougher Than Stainless Steel

blue diamond vs stainless steel tank 2
Some heaters use stainless steel tanks. Blue Diamond performs better with continuous hot water use, especially above 50ºC.

Singapore water is high in chlorides, which can corrode stainless steel. Blue Diamond resists this better, even if the water gets acidic.

Benefit: Blue Diamond lasts longer. Estimated lifespan is over 10 years, and in many Singapore condos, we’ve seen over 20 years of use.

Heaters with no Blue Diamond Rust Easily, and Start Leaking in Less Than 5 Years.

When the internal tank cracks, hot water comes into contact with the metal tank. This starts the corrosion and you see rust. When this happens, the heater must be replaced.

With other brands in Singapore, it happens within 3 to 5 years! That is very short by international standards. An AOS Gen 1 heater can last at least 10 years without this problem.

Every other part of a water heater can be fixed, but we can't repair the inner tank. That is why you should get a good inner tank.
water heater old rusty leak tank
My previous heater was also an AO Smith, and it lasted more than 15 years. Just installed the new heater today. Kalam and Mahadi did a very professional job with the wiring and piping.
F google review
Fook Hou Lee
Google review
A. O. Smith, my go-to water heater brand. Tried the popular Italian brand and the popular Malaysia brand water heater, always end up with leakage or rust in less than 5 years. No leakage or rust issue with my A. O. Smith water heater.
kenn tan google review
Kenn Tan
Google review
how its made blue diamond lining flow
how its made cut out blue diamond tank coil

An Inside Look at Blue Diamond and How it is Coated in the AOSmith Robotic Factory

The foundation of this Gen 1 heater must be rock solid. All new technology features like digital heating, are built upon the premise that at heater will last a long time.

With Blue Diamond, you can take durability for granted. You know the heater will last a long time.

We get the basics right. That's what makes AOS a market leader.

Mrs Prince's Heater in USA, a 50-Year Lifespan World Record

The longest lasting Blue Diamond heater installed in Virginia, America has a record of 52 years. AOS was so proud of this, that they housed this heater in their own museum.

Heaters in Singapore have a proven lifespan of over 10 years. What are you waiting for? Get a durable heater today.
mrs price virginia aosmith 52 year blue diamond heater tank
heater tank leaking ceiling

Buy Peace of Mind, Versus a Hassle Every 5 Years.

Your time is precious. Do you want to hunt for a new heater so often? Look for an installer all over again.. Research the best place to buy.. Make a list and compare prices.

You should get a good heater once and for all. It will save you time and money. Yes, an AOS Gen 1 heater costs more, but a $200 price difference is not a high price to pay for peace of mind.
Best heater ever. 1st heater lasted 17 years. Water pressure is good, will always be AOS.
S google review
S*ra L
Google review
Currently using A. O. Smith for the past 20 years. Still working but ageing. Looking for replacement end of year.
L google review
Louis CT
Email review

Many Old Heaters Heat Slower than New Heaters. Ours Don't.

You have to leave the switch on for longer to get the same amount of hot water. It is inconvenient and expensive.

But did you know? There are heaters that 'lose' their heating ability and heaters that don't. Here is the difference between them. Stay with me. We are about to learn something new.
Chiltern park condo heater lasted 33 years blue diamond

Blue Diamond Coated Elements vs. Steel Elements

Why are some heaters not as hot after 3 years?

Blue Diamond Heating Element vs Steel
old steel elements scale
You won't find patented Blue Diamond coated elements in a normal hardware shop.

Blue diamond has heavy duty scale resistance because it is a fusion of glass and metal.

Even after years, efficiency stays high. Water remains hot like on the first day.
Normal steel elements can be bought from any hardware store.

When metal elements comes into contact with hot water, they scale fast.

Scales lower efficiency. When used for a few years, water is not as hot as before.
old steel elements scale

Old Heating Elements form Scales. Scales Make Heating Inefficient.

Scales come from calcium and magnesium in hot water. They stick to your heating element over time and make it work harder.

Scales destroy your heating efficiency. Heating elements need to burn through scales to heat up the water. This consumes more electricity. An AOSmith heater fixes this.
I bought the 'Blue Diamond' Technology to replace my 5-year old storage tank that had its heating element corroded due to the build-up of scale . Even though the price is slightly higher, I genuinely and truly believe it's money worth spending.

An Interior Designer myself, I have been recommending water heaters from AOS Bath to my clients and all of those who got them had no complaints. Definitely one of the best-looking and well-built ones I've come across.
M'izz google review
M'izz Afiq Bmr
Google review
Blue Diamond Glass Lined Tank and Insulation cut out
how its made inject tank high density insulation
aos insulation thick expanding foam

Inside Look at the AOS Heater's Heavy-Duty Insulation.

The Gen 1 storage heater has thick high density foam insulation. This foam is injected into the heater shell. It expands to fill in every little gap in the heater jacket for seamless insulation. You need a special machine for this.

This special foam insulation retains heat after 18 hours. Other heats lose heat after a short 8 hours.

Better heat retention = less reheating.
Less reheating = lower energy burn.
Low energy = low bills.

Don't go for the cheap stuff. Cheap factories give you thin insulation. You will end up paying more long-term.
The AOS Heater is a massive change from the instant water heaters we used to have. Water delivery is consistently hot. What is most impressive is the water tank's ability to retain heat. Even if the power to the heater is turned off at 10pm, the water is still hot at 9am the next day.
Y google review
Arthur Yong
Google review
Decided to take the plunge after doing research and has been using it for the past 6 months. The price might be higher than the more common and popular brands but the water does remain heated longer. I would just need to on it once in the evening and the water will remain heated for the next 24 hours or longer, depending on your usage and the tank capacity.
D google review
Daniel New
Email review

AOS Insulation. Built Better, Stays Hot Longer.

Why some heaters can't retain heat?

insulation AOS foam high density
AOS heaters have 2-3 inch thick insulation.

They are heavier than other water heaters.

Can keep hot water warm for 18 to 24 hours.

Less heat loss, less heating, less power used.
Other brands use 2-3cm thin styrofoam with gaps.

Cheaper to make but more costly to run.

They keep water warm for less than 12 hours.

More heat loss, more heating, more power used.
AOS outlet gives more hot water gen 1 heater

AOS Outlet Gives You More Hot Water Than Other Brands

Other brands use a curved side outlet. Over time, this outlet bends out of shape and you get 10% less hot water. AOS uses a straight outlet pipe that goes to the very top of the tank.

This straight pipe is durable and does not bend out of shape. This outlet makes sure you get full control and 100% of the hot water in the tank.

AOS Patented Inlet Gives You More Hot Water Than Other Brands

Other brands use a water inlet at the side, and the high pressure of incoming water shoots cold water up into the tank. This disturbs the layer of hot water sitting at the top of the tank, and gives you only 90% of the hot water available.

AOS uses a special inlet which redirects incoming cold water to the sides. The redirected cold water leaves the top layer of hot water undisturbed and gives you 100% of the hot water in the tank.
AOS patented inlet give you more hot water gen 1 heater
After experiencing multiple cold showers with our previous water heater, we decided that it'll be a priority for us to invest in a good water heater for our new home.

After extensive research, we decided on A.O Smith as it was a reputable brand from the US with a long history in manufacturing water heaters.

When we headed down to the showroom, we were impressed by the service and knowledge of the staff. Not to mention, their after-sales service was also top notch as they were very responsive in answering the questions that our contractor had about the installation of the heater.

Admittedly their water heaters are on the pricier side but we have no regrets at all as we believe that the quality of the product and the service provided justifies the extra cost.
L google review
Louis W
Google review
industrial aosmith factory b&w production line
Factory of the #1 Water Heater in USA, since 1930s
Gen 1 pipe line bto beam common bath install
AOS Bath Special Water Heater Inlets
AOS Patented Water Heater Inlet

Every Part of the Storage Tank is Optimised. You Get the Best.

If you are buying an AOS heater, you are buying the best of water heaters. It is crafted with great skill and expertise.

Every feature on this page is for the most basic Gen 1 water heater tank. Every other AOS heater technology is built on this solid foundation.

This exclusive top performance is what you get from a Water Heater Specialist!

Frequently Asked Questions

ELJH turn knob clockwise increase temperature gen 1light

Can I control my Gen 1 heater temperature?

Not accurately, but you can adjust the temperature at the knob on the right side of the tank. Setting temperatures will range around 60 to 70ºC.

Temperature setting for the Gen 1 is an estimate as there are no markings on the knob.
full warranty longest covered singapore

What is the warranty like?

AosBath provides the longest full onsite warranty for water heaters in Singapore.

This is not a partial warranty. That means you have zero out of pocket costs.

This warranty will cover you for three years on transport, parts, and labour.
Get the longest full warranty in Singapore now.
ELJH gen 1 temperature gauge

Is the temperature gauge on Gen 1 accurate?

The gauge is not marked. It can only give you an rough guide.

If the needle points to the right, it means there is hot water in the tank.

Recommended settings

• Turn knob to max, fully clockwise
• Switch on 15 min before use
• Power off after use

Product Specifications

Power (kW) 2.0-2.2
Voltage/ frequency (V/Hz)
220~230 / 50
Temperature range (°C)
35 — 75 ± 5
Rated water pressure (MPa)
0.8
Waterproof grade
IPX4
Gen 1 wiring specification and illustration.
Gen 1 wall mount specification and illlustration eljh mount access light indicator
Capacity (litres) 30 lit 40 lit 50 lit 80 lit 100 lit
Length (mm)
605
710
830
860
1025
Width (mm)
360
360
360
463
463
Height (mm)
360
360
360
463
463
Weight (kg)
17
19
21
31
35